Experience the Kinetico Difference
Until now, all industrial water softeners have been the
same; they use large amounts of salt to regenerate
and simultaneously allow some hard water to leak
into service. Kinetico’s Hydrus water softeners are
different. For more than 30 years, Kinetico has
designed and built the most cost-effective softeners
that provide the best water quality possible.
The Hydrus water softener is the only multi-port
system to use countercurrent, soft water regeneration
right out of the box. This proven and trusted method
of operation results in up to a 40 percent reduction
in salt use when compared to other units. In addition,
waste water volumes are reduced by as much as
30 percent, making Hydrus a more environmentally
responsible water treatment product than others.
Water quality from a Hydrus water softener is
significantly better than the water quality from
traditional co-current or hard water regenerating
systems. With a Hydrus system, hardness leakage
will be reduced by as much as 95 percent.
Single-Tank Configuration
Simplex— Uses raw water to regenerate. This configuration
is the most economical to purchase and the most space efficient; however, operational costs and waste production
are not the lowest. Additionally, it does not offer the
highest water quality.
Multi-Tank Configurations
Duplex— Uses soft water to regenerate.
This design is suited for intermittent higher
flow designs needed by laundry, hotel,
motel and large food preparation facilities.
Duplex flow rates range between 8 gpm
and
200 gpm.
Triplex—Uses soft water to regenerate. This
configuration is ideal for continuous high flow rate applications where water quality
and regeneration efficiency are vital
like in chlorine production, batch filling
operations, boiler feed and other critical
applications. The triplex design effectively
regenerates one tank at a time with only
a slight pressure drop. Triplex system flow
rates range between 12 gpm and 300 gpm.
Multi-Tank— Uses soft water to regenerate.
This configuration ensures high flow rates
with almost no detectable pressure drop
during regeneration. The design offers
high salt efficiency and the softest water
possible. Multi-tank design flow rates range
between 16 and 400 gpm.
Call the experienced professionals at Flag City WaterSystems for all of your commercial and industrial water system requirements. We can provide you with information, products and services for the most demanding applications. We have been serving the commercial and industrial market since 1979. You can contact us at 419-423-8082 or 800-232-7300 or email us at info@flagcitywater.com
Multi-Tank Configurations
Triplex—Uses soft water to regenerate. This
configuration is ideal for continuous high flow rate applications where water quality
and regeneration efficiency are vital
like in chlorine production, batch filling
operations, boiler feed and other critical
applications. The triplex design effectively
regenerates one tank at a time with only
a slight pressure drop. Triplex system flow
rates range between 12 gpm and 300 gpm.
Multi-Tank— Uses soft water to regenerate.
This configuration ensures high flow rates
with almost no detectable pressure drop
during regeneration. The design offers
high salt efficiency and the softest water
possible. Multi-tank design flow rates range
between 16 and 400 gpm.
